i am hardware just searching for sawdust and sunshine from iamhardware.com

DIY Ski Rack - A Step-By-Step Guide To Make Your Own Ski Rack

Introduction

If you're an avid skier, you know the importance of storing your skis properly. Whether you're a beginner or a professional, it's essential to keep your skis safe from damage and in good working order. While you can purchase a ski rack from a store or online, why not make your own? Making a ski rack at home is easy and will save you both time and money.

Materials Needed

To get started, here's what you'll need to make your ski rack:

2 pieces of 4x4 wood (at least 8ft long)
6 pieces of 2x4 wood (at least 8ft long)
2 pieces of 3/4in plywood (at least 4ftx4ft)
Screws
Drill
Saw

Instructions

Step One: Cut the Wood

Using your saw, cut the 4x4 and 2x4 pieces of wood into four pieces each, making sure they are all the same length. For the plywood, cut two pieces into the size you desire. You can make the rack as big or small as you like.

Step Two: Assemble the Pieces

Take the four 4x4 pieces and place them on the ground in an 'X' formation. Place the two plywood pieces on top of the 4x4 pieces, making sure they are centered. Take the six 2x4 pieces and nail them into the 4x4 pieces at each corner of the plywood pieces.

Step Three: Attach the Ski Racks

Now it's time to attach the ski racks. Take the two remaining pieces of 2x4 and cut them into four equal pieces. Nail these pieces into the sides of the plywood pieces, making sure they are evenly spaced. These will serve as the ski racks.

Step Four: Finish the Ski Rack

You're almost done! All you have to do now is to give the ski rack a coat of paint or stain. Once it's dry, you can attach it to the wall of your garage or shed, and you're ready to go!

Conclusion

Making your own ski rack is a great way to save money and create a custom storage solution for your skis. With this step-by-step guide, you can easily make your own ski rack in no time. So grab your tools and get building!